Victorian Floor Tiles

Description

Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, thoroughly dry and free of waxes and coatings. Surface temperature should be between 50??F and 80??F. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated. Liberally apply an even coat with a paint pad, paintbrush, paint roller or solvent-resistant, low-pressure sprayer. Allow to penetrate the surface for 5-15 minutes; denser material may require more time for sealer to penetrate. During this time, distribute excess over entire area to insure even penetration. Thoroughly wipe the entire surface with a clean dry cloth to completely remove all excess sealer from the surface. DO NOT ALLOW SEALER TO DRY ON THE SURFACE. A second coat may be needed for porous, absorbent surfaces and should be applied one hour after initial application as directed in steps 2-3. If sealer was not completely wiped off and a residue appears, wipe entire surfae with a towel dampened with sealer. Use a white nylon pad to loosen residue and follow with a clean, white absorbent towel to remove. Do not walk on surface for at least 4-6 hours. Full cure is achieved in 24-72 hours. Clean equipment with mineral spirits. Size and Coverage Quart: 50-250 sq. ft. Expected Wear: 5-10 years Stonetech

The StoneTech professional heavy duty exterior stone and masonry sealer is a superior water repellent and stain protector for all interior and exterior stone, ceramic tile, marble, limestone, granite, grout, saltillo tile, slate, terrazzo, travertine, sandstone and clay products. The liquid emits a very low odor, allowing the product to be used for interior or exterior jobs, and provides coverage for up to 250 square feet. The sealer is weather resistant, can inhibit efflorescence, is water repellant, features non-yellowing properties, and is great for building facades. The sealer also contains FDA compliant solvent and is chlorine resistant.

Features

• Heavy-duty exterior stone and masonry sealer for superior water repellency and stain protection
• Designed for many types of interior and exterior surfaces
• Provides coverage for up to 250 square feet
• Contains FDA compliant solvent, and chlorine resistant
• Emits a very low odor; ideal for interior jobs

Description

New!Its Like a New Floor in a Bottle!Wood Floors and m

Features

• Holloway House 77777-5 27 oz Quick Shine Floor Finish
• HOLLOWAY HOUSE INC

Description

Remove ceramic tile and old grout with the Fein MultiMaster Tileworker Kit. Make easy work of replacing broken tile or refinishing your tile walls, floors, or countertops to like-new condition. Kit includes 6 blades: Carbide rasp: prepares any surface for new adhesive by removing the old adhesive. Standard E-cut blade: undercuts door jambs and counter kicks for a perfect slip fit of the new tile into place. Thin carbide blade: great for grinding out grout when replacing broken tiles. Standard carbide blade: also great for grinding out grout. Scraper blade: useful when removing old tile adhesive. Universal E-cut blade: cuts wood, plaster, drywall, synthetic and plastic material, and metal up to 1/32" thick. MultiMaster not included.

Features

• Tile Working Kit for removal of grout between grout lines
• Tile Working Kit with Accessories for cutting Door Jambs and Floor Boards
• Used on Fein MultiMaster exclusively
• Flexible Scraper Blades for removing caulk around bath tubs and sinks
• Quick Change System on Fein MultiMaster Blades

Description

Guaranteed To Meet Your Satisfaction! How To: determine what all needs to be removed How To: prepare area for demolition Where You: should start and what to look for What it: should look like when you're finished Very Easy: to follow using simple steps! All Videos Come With Free Follow Ups Via Email or Phone! Bath Floor Removal Project measuring 5' x 8' over a wood sub-floor. Plywood underlayment for vinyl was also needed to be removed and explained why. Try this video and if you like what you see, you will like the others too.You have nothing to lose. If you're not completely happy with this instructional video... return it to me and I will refund your money. If you like what you see, please leave a review. Please keep in mind that I am a full time tile contractor with over 20 years experience. This video is filmed, edited and produced by me and not a high production video.

Description

The Henkel PL premium polyurethane construction adhesive is three times stronger than regular construction adhesives and is compatible with all traditional building materials. The VOC compliant adhesive formula meets State and Federal VOC regulations and exceeds glued sub-floor (AFG-01 and ASTM D 3498) and drywall construction (ASTM C 557) codes as well as FMA bulletin UM 60a. Once cured, the bond is both weather and waterproof. The adhesive is elastic and remains flexible to expand and contract with bonded material movement to protect the original seal. It can be used both indoors and outdoors and is ideal for sub-floor installation as well as bonding polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble and OSB. This adhesive dries bronze and comes in a 10.2-ounce cartridge, for use with a standard caulk gun.

Features

• Interior and exterior
• Resistant to moisture, dampness and temperature changes
• Fast cure
• Non-staining
• Low VOC

Description

The powerful 6.5 Amp motor on the Bosch 11320VS gives it the highest removal rate in its class! A specially-designed impact mechanism provides a smooth change between no-load and hammering modes and gives superior tool control for easier positioning and p

Features

• 6.5 Amps
• 0 - 3,500 No Load BPM
• 6.2 ft. lbs of impact energy
• Soft-grip handle absorbs shock and vibration
• Tool-free bit changes with auto bit locking

Description

Rejuvenate Floor Restorer and ProtectantSee what Rejuvenate can do for you!Designed for older floors that are showing their age and wear, Rejuvenate Floor Restorer & Protectant is a polymer-based floor finish that works on almost any kind of flooring, including hardwood, wood laminates, ceramic tile, terrazzo, terra cotta, slate, flagstone, vinyl/linoleum, cork, cement, fiberglass, and finer polished stone such as marble.In addition to filling in scratches, it brings back long-lost shine and seals and protects against damage such as stains and UV rays that cause fading.It also increases traction by up to 50 percent and provides enhanced safety for people and pets alike. Every 16-ounce bottle is enough for up to 325 square feet.Can be used on:Ceramic tile Concrete Slate Linoleum Laminates No wax Sealed marble Sealed hardwood Terrazzo Fiberglass Grout Flagstone Cork Includes and Features:1 x 16 oz of Rejuvenate Floor Restorer & Protectant to fill in scratches, restore shine and protect any size room up to 325 sq. ft. Fills in scratches and eliminates dull spots Provides enhanced traction to slippery floors

Features

• Designed for older floors that are showing their age and wear, Rejuvenate Floor Restorer & Protectant is a polymer-based floor finish that works on almost any kind of flooring
• addition to filling in scratches, it brings back long-lost shine and seals and protects against damage
• It also increases traction by up to 50 percent and provides enhanced safety for people and pets alike. Every 16-ounce bottle is enough for up to 325 square feet
• 1 x 16 oz of Rejuvenate Floor Restorer & Protectant

Description

This blade is designed to remove grout from standard grout lines 5/64-inch and bigger. The oscillating action of the tool vibrates the grout out without damaging the tile on either side of the grout line. The carbide coating on the blade allows for rapid grout removal from in between tiles. The segmentation allows for removing one tile at a time as well as grout removal against a wall without damaging the wall.

Features

• Removes grout between tiled surfaces
• No danger of damaging adjoining tile
• Designed for standard grout lines
• Segmentation allows for single tile removal as well as grout removal against a wall without damaging the wall
• Long lasting silicon-carbide cutting surface

Description

Bean*e*doo, Just pour and scrape! Bean* e*doo makes the removel of asbestos mastic, carpet mastic, and ceramic tile mastic clean and simple. Mastic removers are amazed at the NO ODOR and NO RESIDUE properties of this product. Just pour Bean*e*doo on the mastic you need removed and in about an hour you will be amazed at how the mastic turns so soft you can scrape it off with your business card! All you need for clean up is a water rinse.

Features

• Made from soy beans
• landfill acceptable
• 100% biodegradable
• effective on black and white mastic

Description

Easily attaches to Dremel rotary tool models 275, 285, 395, 398 and 780 in place of the housing cap. Has a 30-degree angle for controlled cutting along the grout line. Two guides on the attachment to keep the bit centered between the tiles. Large window for excellent visibility. The Multiple Slide Depth Adjustment in 2.5mm increment markings makes it easy to reference the depth of cut desired.

Features

• Now grout removal is easy.
• Easily screws on to the front of your DREMEL rotary tool
• Removes both wall and floor grout
• Includes No. 569 - 1/16-inch Carbide Grout Removal Bit
• For use with rotary tool models 275, 285, 395, 398 and 781