Victorian Floor Tiles

Description

Dremel accessories are designed to be just what you need to complete the project.

Features

• Steel shank cutter
• Cuts wall tire
• Not for use on floor tile
• Do not run in excess of 30,000 RPM

Description

RotoZip Tile Dock delivers quicker, more accurate cuts with less broken tile than conventional methods of securing while tile cutting. It accommodates cut-outs and cut-offs in large and small tile.

Make quick, accurate cuts and avoid the expense and mess of broken tile with the RotoZip TD1-10 Tile Dock. Ideal for professional tile setters, remodelers, and advanced do-it-yourselfers, this tile cutting station secures large and small tile for cut-outs and cut-offs. Whether you're cutting drain, flange, or plumbing fixture holes, bull nosing, or edge sanding, you'll appreciate the controlled support the TD1-10 provides.The RotoZip TD1-10 Tile DockAt a Glance:Portable and lightweightTwo corner tile dogsThree tracing templatesConvenient one-handed clampAdjustable vacuum hose mountSecure tiles with the one-handed clamp for easy cut-offs. View larger.Use the adjustable vacuum hose mount for fast and easy clean-up. Portable Tile Dock Helps You Get a GripWhen it comes to securing tile for intricate or difficult cuts, tile installers have come up with some inventive work-arounds. Luckily, with the TD1-10, there's now an easy way to make quick, accurate cuts--without broken tiles. Thanks to its convenient one-handed clamp and corner tile dogs, the TD1-10 lets you secure tiles in any orientation for difficult cut-outs and cut-offs.Whether you clamp it to a work table or use it on the floor, the portable and lightweight TD1-10 provides an ideal place for cutting tiles of all sizes. It uses non-slip universal mounts for securing the base with screws, bolts, clamps, feet, or knees.Tile Cutting Station for Easy, Quick CutsFor added convenience, the TD1-10 works with all portable cutting tools and comes with three cut-out templates for tracing common cuts. Because you'll finally be able to use both hands when cutting, you'll see cleaner, quicker cuts.The TD1-10 can accommodate just about any type of tile (4 to 18 inches long, 1/4 to 1/2-inch thick), even small tiles with mesh backing. A removable insert lets you work with smaller pieces; just remove it to support large pieces. For further versatility, you can use a 1/2-inch-thick piece of scrap material to lend support to fragile or brittle tiles. The TD1-10 comes with an adjustable vacuum hose mount. When your job is done, cleanup is fast and easy--just stow the TD1-10's accessories underneath the cutting station.About RotoZipRotoZip was founded in 1972 when a professional drywall contractor sought a better, faster way to cut drywall. Focused on saving time and money while improving his results, this single vision soon spawned a complete line of high performance professional tools, accessories and attachments for cutting a wide variety of building materials. Today, RotoZip continues to build upon the same strong foundation established over two decades ago as the world's number one Spiral Saw system.What's in the BoxTD1-10; support insert; clamp; two corner tile dogs; adjustable vacuum hose mount; and three tracing templates. RotoZip Tile Tool Kits and AccessoriesFor more information, click on the images belowTD1-10Tile DockXW-TILE1Tile X-WHEELXB-FT1Floor Tile X-BitRZ05-2500FTFlooring & Tile KitRZ10-3100FTFlooring & Tile Kit

Features

• Versatility - Quick Clamping system secures tiles in any orientation for difficult cut-outs and cut-offs. Works with all portable cutting tools
• Adjustable vacuum hose mount - collects dust and debris
• Non-slip universal mounts - secure base by screw, bolt, clamp, foot or knee
• Common cut-out templates - for tracing common cuts
• Removable tile support - provides support for smaller tiles

Description

Hide damaged walls with self-stick, tile covers. Give any area a whole new look Durable, won't stain, crack or chip. Ideal in kitchen or bathroom. Square tilecover surface, triangulat tiles fill in edges in four handsome finishes. Cut to fit with scissors, no grout needed. Clean with soapy cloth. Square tile package covers three square feet, triangular one and a half square feet. Set of 24.

Features

• Hide damaged walls with self stick tile covers
• ideal in kitchen or bathroom

Description

Clorox Company Products - Lemon Fresh Pine Sol, 144 oz., 1/EA - Sold as 1 EAAdvanced grease-cutting formula removes tough grease and grime. Cleans, deodorizes, and shines unfinished and no-wax floors, tile, walls, sinks, countertops, microwaves, refrigerators, stoves, range hoods, deep fryers and more.Sold as 1 EAManufacturer: Clorox CompanyTotal percentage of recycled content: 0Post Consumer Waste: 0Country of origin: US

Features

• Sold as 1 EA
• Manufacturer: Clorox Company
• Total percentage of recycled content: 0
• Post Consumer Waste: 0
• Country of origin: US

Description

The Roto Zip Xbit diamond coated floor tile cutting bit handles porcelain, granite, glass and other hard tile. 2.5 carats of diamond grind through the toughest tiles.

With the RotoZip XB-FT1 Floor Tile XBIT, you can make intricate and detailed cuts in porcelain, granite, slate, glass and ceramic floor tile. Ideal for professionals or experienced do-it-yourselfers, this contractor-rated bit offers a convenient and affordable solution for cutting holes and small curved cuts in hard tile.2.5-carat diamond grit powers through porcelain, granite, slate, glass, and ceramic floor tile. View larger.One Bit Handles all of Your Tile-Cutting NeedsSave yourself the time and expense of purchasing multiple bits. The precision engineered XB-FT1 keeps things simple and affordable by being the only bit you need to make holes small curved cuts in hard tile. The XB-FT1 even lets you make cuts in any direction, including circles, outlets, panels, etc. It also saves you time by working up to two times faster than nibblers. What's more, this contractor-rated 5/32-inch diameter bit is up to five times stronger than comparable 1/8-inch bits, so you can stop worrying about annoying replacements.2.5-Carat Diamond Grit for Tackling Any JobWhether you're installing kitchen counter, laying flooring, or building a bathroom backsplash, you'll appreciate the way the XB-FT1's 2.5-carat diamond grit powers through hard tile. In fact, it allows you to make plunge cuts in over 14 linear feet in 3/8-inch porcelain, 35 feet in 3/8-inch ceramic, and nine feet in 1/2-inch granite. For further convenience, the XB-FT1 cuts dry--no water is required for smooth, precise results.About RotoZipRotoZip was founded in 1972 when a professional drywall contractor sought a better, faster way to cut drywall. Focused on saving time and money while improving his results, this single vision soon spawned a complete line of high performance professional tools, accessories and attachments for cutting a wide variety of building materials. Today, RotoZip continues to build upon the same strong foundation established over two decades ago as the world's number one Spiral Saw system.What's in the Box One XB-FT1 Floor Tile XBIT.RotoZip Tile Tool Kits and AccessoriesFor more information, click on the images belowTD1-10Tile DockXW-TILE1Tile X-WHEELXB-FT1Floor Tile X-BitRZ05-2500FTFlooring & Tile KitRZ10-3100FTFlooring & Tile Kit

Features

• 1/4-Inch Diameter - For intricate and detailed cutting
• 2.6 Carat Diamond Grit - For over 45 plunges in porcelain tile
• Now with 1/4-Inch Shank - For greater strength and ruability
• 1 per pack
• See RZ website for details on how to get the most out of your floor tile bits

Description

The Bosch GT3000 is an 8-Piece Glass and Tile Bit Set. Glass and tile applications have never been easier with the Bosch GT3000 8-Piece Glass and Tile Bit Set. Nobody but Bosch is offering the innovation found in our product design. The Bosch GT3000 features a unique product geometry with a precision tip, high-quality carbide and reinforced head that results in best-in-class speed and life when cutting in glass and tile.   Features: Precision tip - Solves bit wander and bit walking 8-Piece set with most common sizes. High quality carbide with a reinforced head that prevents bit cracking and provides a longer life Three flat shank to prevent slippage Bosch branded, innovative geometry allows bits to drill faster What's In the Box: Bosch GT3000 Glass and Tile Bit Set 8-Piece

Features

• Precision tip - Solves bit wander and bit walking
• 8-Piece set with most common sizes.
• High quality carbide with a reinforced head that prevents bit cracking and provides a longer life
• Three flat shank to prevent slippage
• Bosch branded, innovative geometry allows bits to drill faster

Description

Sold as each. 1-1/2". Cuts 1/2" thick floor tile. Cuts ceramic materials. Straight cuts with little dust. Easy to assemble. Use for cutting floor tile for fixtures. Expanding bathroom outlets. Manufacturer's number: EZ545. Country of origin: China. Distributed by Dremel Mfg Co.

Features

• The Dremel EZ Lock makes accessory changes easy as pull - twist - release
• The one-piece mandrel design simplifies makes it easy to cut through plastic
• Cuts 1/2-Inch thick floor tile and ceramic materials
• Make straight cuts with little dust
• Easy to assemble

Description

Glass and tile applications have never been easier with the Bosch GT300 Glass and Tile Bit! Nobody but Bosch is offering the innovation found in our product design. Our product features an unique product geometry with a precision tip, high-quality carbide and reinforced head that results in best-in-class speed and life when cutting in glass and tile.

Features

• Precision tip - solves bit wander and bit walking
• Available in large sizes offered by no one else (up to 1-Inch). Sold in open stock or in kits
• High quality carbide with a reinforced head that prevents bit cracking and provides a longer life
• Three flat shank to prevent slippage
• Bosch branded, innovative geometry allows bits to drill faster

Description

Glass and tile applications have never been easier with the Bosch GT900 Glass and Tile Bit! Nobody but Bosch is offering the innovation found in our product design. Our product features an unique product geometry with a precision tip, high-quality carbide and reinforced head that results in best-in-class speed and life when cutting in glass and tile.

Features

• Precision tip - Solves bit wander and bit walking
• Available in large sizes offered by no one else (up to 1-Inch). Sold in open stock or in kits
• High quality carbide with a reinforced head that prevents bit cracking and provides a longer life
• Three flat shank to prevent slippage
• Bosch branded, innovative geometry allows bits to drill faster

Description

This is a great little tabletop saw that is perfect for the weekend do-it-yourselfer. It's easy to set up, very lightweight and precise. The 1/3 hp motor provides plenty of power for projects like cutting counters or floor tiles. The sliding platform allows you to move your work into the blade with a smooth and controlled motion giving you square and accurate cuts every time. This 7 in. versatile and compact tabletop tile saw is designed for the do-it-yourselfer with a high torque, universal motor.

This is a great little tabletop saw that is perfect for the weekend do-it-yourselfer. It’s easy to set up, very lightweight and precise. The 1/3 hp motor provides plenty of power for projects like cutting counters or floor tiles. The sliding platform allows you to move your work into the blade with a smooth and controlled motion giving you square and accurate cuts every time. It comes with a 7-inch diamond saw blade that cuts a maximum of 12-inch square, a water pump and adjustable rip guide. Great value for the money. --Jodi Johnson

Features

• 7-inch bench wet tile saw
• 1/3-horsepower engine for high torque (5500 rpm) and power
• High-impact thermoplastic water reservoir will not rust or peel
• Includes saw, 7-inch diamond blade, submersible water pump, adjustable rip guide
• 15 pounds; 1-year warranty