Victorian Floor Tiles

Description

Today, more than 1,000,000 households in the U.S. and Canada enjoy warming products made with patented ThermoSoft's FiberThermics® technology inside! Buy from the manufacturer-ThermoSoft- and get Lifetime Warranty and Live Support for your floor heating system. ThermoTile is a truly versatile in-floor heating system that can be used under most floor coverings Tiles, Floating floors (Pergo, engineering wood, etc.) even thin rugs because it's only 1/8-inch thick, unlike other, thicker radiant floor heating systems. All you need to do is to cover it with thinset mortar or regular cement. ThermoTile is UL Listed and carrying an industry leading Lifetime Warranty (!). ThermoTile is a solid-state system with no moving parts to break or wear out. There are no ducts to clean, no allergens to worry about, burners to service, or fuel tanks that have to be replaced regularly. Once ThermoTile is installed, you can forget about maintenance.

Features

• Voltage: 120V, Power: 180 Wt, Amperage: 1.5 Amp. , Heating area coverage (any shape): 15 sq. ft.
• Zero Electromagnetic Field (!). No interference with electronic devices in the house.
• Four insulation layers including an outer alkaline, acid and mechanical resistant Nylon layer.
• Installation-friendly 10' armored lead wires are pre-attached to only one end (!) of mat.
• Made in the USA with Lifetime Warranty (!), UL listed and we ship same or next business day.

Description

Fan forced wall heater is perfect for bathrooms or other areas where quick heat is needed. Built in thermostat maintains desired temperature. Designed for easy, recessed installation or surface mounting (requires model No. 84 surface mount kit). Designer

Features

• Factory wired for 1500-Watt at 120VAC I easily converts to 750-Watt at 120VAC or 1500-Watt at 240VAC
• Heavy 20-gauge steel; louvered to direct air downward for even room heating
• Front-mounted, built-in adjustable thermostat automatically maintains desired temperature and features a color coordinated knob
• 100 percent efficient heating element - alloy heating element provides comfortable heat in seconds - Zig-Zag element configuration insulated with mica
• Complete assembly removes from housing for easy cleaning with permanently lubricated motor

Description

Glass and tile applications have never been easier with the Bosch GT500 Glass and Tile Bit! Nobody but Bosch is offering the innovation found in our product design. Our product features an unique product geometry with a precision tip, high-quality carbide and reinforced head that results in best-in-class speed and life when cutting in glass and tile.

Features

• Precision tip - solves bit wander and bit walking
• Available in large sizes offered by no one else (up to 1-Inch). Sold in open stock or in kits
• High quality carbide with a reinforced head that prevents bit cracking and provides a longer life
• Three flat shank to prevent slippage
• Bosch branded, innovative geometry allows bits to drill faster

Description

A direct descendant from the Helos100, the Helos20 continues with the MartinLogan tradition of exceptional sound. The Helos20 has the ability compliment any décor with it's paintable grill and frame. Sonically, the Helos20 boasts a dual voice coil system with two 0.75 inch soft dome tweeters with a pivoting stem and a single 6.5 inch woofer, creating crisp accurate sound. Frequency response ranges from 47-20,000 Hz.

Features

• Stereo capable, MartinLogan in ceiling for great sound in smaller single speaker environments
• Solid hardware for clean and reliable installation
• Twin 3/4" tweeter, aluminum woofer and top crossover for great stereo sound from a single unit
• Easy to power with nearly any electronics
• Included shield for easy painting allows Helos20 to match any décor

Description

I am a hundred percent sure that most of you always look for some home improvements. In fact, this idea occurs every day. However, most of us seldom focus our home improvements outside the home but rather inside, and the usual spot for such activity by most people is the bathroom. Well, for some reasons, the improvement involved in the bathroom is really important as we spend much time in that place. In this article, I would be dealing with some tips and techniques for improving the looks of your bathroom. The main focus here is mainly on bathroom installation, particularly on shower or bathtub installation, bathtub enclosure and bathtub surround installation. But before anything else, let us look at some common mistakes and recommended guidelines involved with bathroom installation.Most Common Mistakes and Guidelines for Bathroom InstallationThere are a number of common errors observed from most of the bathroom installation. Here is a list of those errors:· Ignoring or violating local code restrictions · Employing pipes that are too small · Attaching copper to galvanized without employing a brass or dielectric fitting between the two · Not considering Teflon tape or pipe compound especially at threaded joints · Not installing an air gap filling for fixtures · Not properly aligning tubing into fitting or stop valves · Cutting supply stub outs too short to install the shutoff valves onto after the finished wall is in place · Not leveling fixtures when installing them

Description

The bathtub bar that locks to the side of your tub allows for you to get in and out of your tub. It has a crank-style, locking device that attaches to tub walls up to 7inches wide. The unit is 6 inches wide and extends 14 inches above the tub wall. It is equipped with rubber pads to protect the tub walls and weighs only 12 pounds. 250 pound weight capacity. All coated steel design for durability.

Features

• Easily locks to the side of most bath tubs
• holds up to 250 lbs
• Large, oversized tightening device for easy installation
• Rubber pads to protect walls of bath tub
• Provides stability getting in and out of the tub

Description

Tub-guard bathtub safety rails tall 16 1/2 inch height. textured, contoured handle provides a good gripping surface. clamp holds firmly to tub wall without marring tub surface. lightweight, compact design is excellent for travel. fits tubs with walls 2 1/2 inch to 6 1/4 inch thick. not recommended for use with fiber grlass tubs. tool-free installation. tall model provides two griipping surfaces for ficilitate both entry and exit from tub. 250 lb maximum weight capacity.

Features

• Bath tub safety rail
• Tall 16 1/2 inch
• Clamps fimly to tub wall
• 250 lb maximus weight capacity
• Tool free installation

Description

K-7104-CP Finish: Polished Chrome This drain installs above the floor with the Antique or IV George Brass bath faucet and Iron Works bath. It features a 1-1/2'' connection and brass tailpiece. Solid brass construction ensures durability and reliability. Choose from an array of beautiful finishes for a personal touch. Features: -Available in the following finishes: vibrant brushed nickel, vibrant brushed bronze, polished chrome, brushed chrome, vibrant polished brass -Reliable and durable solid brass construction -Finishes resist corrosion and tarnishing -For above-the-floor installation with Antique or IV Georges Brass recommended bath faucet -Adjustable trip lever pop-up drain -1-1/2'' connection -Brass tailpiece -For use with Iron Works bath -Overall dimensions: 4'' H x 10'' W x 18'' D Iron Works Drain Specification Sheet & Measurements Iron Works Drain Installation Instructions Iron Works Drain Homeowner's Guide and Service Parts

Features

• Solid brass construction for durability and reliability
• KOHLER finishes resist corrosion and tarnishing, exceeding industry durability standards two times
• For above-the-floor installation with Antique or IV Georges Brass recommended bath faucet
• Adjustable trip lever pop-up drain
• 1-1/2-Inch connection

Description

Hide damaged walls with self-stick, tile covers. Give any area a whole new look. Durable, won't stain, crack or chip. Ideal in kitchen or bathroom. Square tiles cover surface, triangular tiles fill in edges in four handsome finishes. Cut to fit with scissors, no grout needed clean with soapy cloth. Square tile package covers three square feet, triangular one and a half square feet. Set of 24.

Features

• Give any area a whole new look; ideal in kitchen or bathroom
• Durable- won't stain; crack or chip
• Cut to fit with scissors; clean with soapy water
• Self-stick, no grout needed
• Set of 24; covers 3 square feet

Description

Tile Redi is the inventor of Tile Ready shower products. Tile Redi is both the industry innovator and industry leader of the Tile Ready shower base, and has the industries largest selection of Tile Ready shower pans, including single curb shower bases, bathtub replacement shower pans, and ADA and barrier free shower pans. Our Tile Ready shower pans are one piece shower pans with fully integrated drains, integrated 6 inch splash walls, integrated curbs or barrier free entrances, and integrated pitch ¼ inch per foot to the drain. Unfinished and Mold free. Drain is optional.Now you can install the only leak-proof and tile market in less time, with less labor, and at a lower cost!

Features

• One piece shower pan. 48"W x 34"L x 7"D
• Ready for tile installation. 100% LEAK PROOF.
• n, 34 inch Depth-Measured from the Front of the Curb
• Comes with an integrated drain, curb and side splash walls.
• Manufacturer Warranty 3 years.Rectangular shape tray.